Boyueda Electric Scooter Installation

 User manual of Boyueda S5-11

1.Preface

Dear Customer :
Thank you for using our electric scooter. With this electric scooter, you will deeply appreciate its powerful features, excellent performance, and superior quality, which will bring you a pleasant travel experience.

Thank you for your concern and kindness. Our development is inseparable from your support and trust. Adhering to the product philosophy of "Technology Achieves a Free Life," our company uses innovation to lead a high-end, technologically advanced lifestyle. We uphold the corporate philosophy of "Technology, Happiness, and Safety" and adhere to the principles of customer first, product quality first, and service first as our foundation.

At the same time, we are committed to environmental protection and energy conservation, independently innovating and developing new products, and continuously exploring the widespread application of green energy in daily life to truly achieve "zero pollution and zero emissions." We are committed to using the power of technology to contribute to building a free and happy life. With higher production standards and higher-quality product configurations, we aim to become an industry leader.

Please read this manual carefully before use.  Please retain this manual for future emergencies. In particular, please contact our authorized dealer or technical service center if you have any questions regarding our special parts.

2.Warning  items

1. Keep batteries away from sources of fire, flammable or explosive materials, or corrosive materials.
2. Do not disassemble the battery housing to prevent short circuits and battery damage.
3. Do not use wires or conductors to connect the positive and negative terminals of the battery to avoid unnecessary damage.
4. Handle batteries carefully to avoid dropping them, damaging the housing, and causing accidents.
5. Batteries should be charged in a dry, ventilated environment, away from moisture, and away from flammable or explosive materials.
6. The dedicated battery charger must not be disassembled. The charger and battery housing must not be covered with anything to prevent heat dissipation and damage to the charger and battery.
7. Keep the battery away from children's play areas.
8. This product has gear shifting and speed limiters. Do not exceed the speed limit under normal circumstances (the national standard is 25 mph).
9. Any disassembly of the body will create safety hazards and potential dangers for your electric scooter.
10. Avoid using the scooter on bumpy roads, railroad tracks, gravel roads, or stairs to prevent tire blowouts, wheel deformation, and damage to your scooter. When braking at high speed or downhill, do not use the front brake to avoid dangerous forward shifting of the center of gravity.
11. Inspect and confirm the safety and reliability of components such as the brakes, frame, handlebars, wheels, and saddle to avoid accidents.
12. Do not add oil to caliper brakes, disc brakes, V-brakes, or brakes with pads to prevent brake failure.
13. Do not hang heavy objects on the handlebars to avoid accidents caused by improper operation.
14. Scooters are designed for single riders. Due to the limited power of the scooter, overloading can pose a safety hazard.
15. When riding in the rain, please wear a raincoat and never hold an umbrella with one hand. Please obey traffic laws and regulations when riding.
16. Please wear a helmet and other protective gear when riding and pay attention to riding safety.

3.CHECK  BEFORE  RIDING

1.The saddie must be adjusted in a comfortable and safe positon.
2.The instrument must be correct and the lamp and hornare work ing  properly.
3.Brake handle must be sensitive and reliable,whether the motor braking power.
4.Speed switch must be flexible,reliable,no clearance andloose motion.
5.Front and reartire gas must be adequate,wear is normal. 
6.Rotating parts of the flexible non blocking phenomenon.
7.Front axle nut must be tightened without loosening.
8.After the nut must be tightened without loosening.
9.Check whether the battery is sufficient before riding.
10.The car pole fold safety must be secured in place.

4.Bicycle Guide

1. Do not ride your electric scooter if you do not understand anything before carefully reading this manual.

2. Before riding, carefully check that all components are in good condition to ensure your safety. If you find any problems, please contact us.

3. For the safety of yourself and others, please obey traffic laws.
Operate in the slow lane and do not carry passengers. Electric scooters are not suitable for riding on bumpy or steep roads.
When riding on the road, ride slowly or dismount and push the scooter. Ride slowly on slippery surfaces. Riding in rainy, snowy, or flooded roads is not recommended.

4. Electric scooters are rainproof, but they cannot be used in water. Water in the battery compartment and motor can damage the internal wiring of the motor, so please be extremely careful.
(Water damage is not covered by the warranty.)

5. The battery is affected by temperature. When the temperature drops below 0°C, the battery capacity may decrease, reducing the range on a single charge. The battery will return to normal as the temperature rises.

6. Avoid exposing your electric scooter to humidity, high temperatures, or corrosive gases. Avoid prolonged exposure to sunlight or rain to prevent damage to the scooter's electrical components, which could lead to malfunctions or accidents.

7. Slow down when turning and avoid sharp turns. Pay attention to traffic signs and do not ride with passengers. Refer to the battery indicator light to determine the battery level (the more lights, the longer the battery life). If you notice any abnormalities while riding (brake failure, momentary power outage, power-off braking, etc.), dismount and inspect the scooter immediately or take it to a repair facility for repair. Do not continue riding.

8. When adjusting the handlebars and saddle, ensure that the safety markings on the seat tube and saddle are not exposed.

9. When riding, place both feet on the pedals with your right hand and slowly turn the speed control switch toward the scooter, gradually releasing it. When accelerating, the speed control switch will reduce the speed. After deceleration, the speed control switch will automatically reset, and the motor will automatically stop.

10. Our electric scooters have a power-off brake function. Pressing the left or right brake pedal will disconnect the power supply to ensure safe riding.

11. Do not ride the electric scooter if its performance is unstable.

12. Some models have an automatic speed control function. Turn the speed control switch continuously to activate it. The speed control will automatically start after 5-8 seconds. In the event of an emergency stop, you can apply the brakes or turn the speed control switch again to automatically disable the speed control function.

5.Correct use of electronic control systems

1.The electronic control system is composed of a controller,an electric quantity display,a speed regulating switch and a com  binedhandle.

2.The controller has stepless speed regulation,brake power off  protection,voltage  undervoltage  protection  and  current  limiting protection.

3.The controller is to control the speed of the motor parts,direct- ly related to the vehicle ride performance controller,riding in the   required riders slow rotation speed,excessive force may cause
damage to the governor.

4.Users should regularly check the contoller to keep the shell clean,   conducive to heat dissipaton,to see whetherthe wiring harness con-  nection controller is reliable,such as the interface has a hot deforma- tion occurs,to immediately replace repair.

5.Users should regularly check the turn,power brake,such as turning the handle to losen,can not be reset in a timely man  ner,the power brake can not cut off the power of the motor  should be immediately repaired or replaced.

6. If the controller has no voltage indication, please send it to a repair station.

7.If the milage is significantly reduced,the user must check w hetherthe  controllrover-current  protection  falure,orfor  other   reasons,but the controller must be sent to the maintenan
cestation repair or replacement.

6.Correct use of batteries

1. Users should keep the battery fully charged and avoid storing it with a low charge; otherwise, the battery life will be severely affected.

2. Batteries should be charged regularly (usually monthly) when not in use.

3. Batteries should not be placed near open flames or high-temperature heat sources, should not be thrown into fire, and should not be exposed to direct sunlight.

4. During the charging process, prevent overcharging and over-discharging of the battery.

5. Do not use wires or conductors to connect the positive and negative terminals of the battery to avoid danger and damage to the battery.

6. The recommended operating temperature for the battery is 5-30°C. During the hot summer months, keep the battery in a cool, well-ventilated place. During both summer and winter months, keep the battery in a cool, well-ventilated place.

7. Do not charge the battery immediately before a long ride. Allow the vehicle to cool for approximately 30 minutes before charging.

7.Correct use of the charger

1. Charge immediately after a ride or when the battery voltage is low. Batteries stored for extended periods must be fully charged and recharged monthly. Always turn off the power switch during charging.

2. Keep the charger away from children, in a dry, well-ventilated environment, away from moisture, and away from flammable and explosive materials.

3. Use only our company's dedicated charger. Failure to do so will affect the battery life or damage the battery at your own risk.

4. Align the notch on the charger output plug with the raised dot on the charging socket.

5. The maximum continuous charging time is no more than 18 hours.

6. The charger is not connected to an AC power source.

7. To stop charging, unplug the AC power plug and unplug the charger power plug. Always follow these instructions.

8. Place the charger securely in a safe position and correctly insert the charger output plug (low-voltage DC end) into the outlet. Then, plug the charger output plug (220V end) into an AC outlet. Connect the charger to the power supply. When the charger power indicator lights up, power is connected and charging begins. When the charging indicator turns green, charging is complete.

Reminder

The arrow in the picture points to the charging port       

8.Function display, button display

Mobile phone APP software to connect the vehicle

9.Vehicle components