How to Fix the Issue Where a Boyueda E-Scooter Won’t Start After Replacing the Motor/Controller?

If your Boyueda S3-11 scooter won’t start normally after replacing the motor or controller, it may be because the scooter needs to undergo a pairing process. Here are the detailed steps for pairing: 

Step 1: Locate the front controller. After turning off the display, first plug in the white pairing cable from the front controller; do not connect the white cable from the rear controller.

Step 2: Turn on the display. Note: Do not accelerate manually.

Step 3: Wait until the wheels are spinning normally, then unplug the pairing cable.

Step 4: Wait until the wheels have come to a complete stop, then turn off the display. Important: Do not accelerate manually during the pairing process, and make sure the dual-drive switch is turned on.

 

Powrót do blogu